BKQPV - SAVIN 9250 DISPERSANT, 887073
- MSDS: BKQPV
- Manufacturer: RICOH CORP
- Product Name: SAVIN 9250 DISPERSANT, 887073
- National Stock Number: 6850-00N016904
Product Identification
Product ID:SAVIN 9250 DISPERSANT, 887073
MSDS Date:10/18/1990
FSC:6850
NIIN:00N016904
MSDS Number: BKQPV
Responsible Party
WEST CALDWELL, NJ 07006
US
Emergency Phone: 800-336-6737
Info Phone: 201-882-2000 800-336-6737
Preparer: KRISTINA SAGE
Cage: 54726
Contractor
Telephone: 800-336-6737
Cage: 54726
Ingredients
HYDROTREATED HEAVY NAPHTHA
CAS: 64742-48-9
Fraction By Weight: >99.0%
ACGIH TLV: 300 PPM (MFR)
RESIN MALEATED POLYMER
Fraction By Weight: <01.0%
BEFORE BREAKS/MEALS, @ END OF WORK PERIODS. PROD
RTECS: 9999999ZZ
CLEANERS FOLLOWED BY WASHING WITH SOAP AND WATER.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SLIGHT CONJ IRRIT. SKIN:
MILD IRRIT UNDER CNDTN OF EXCESSIVE EXPOS. INHAL: NO UNTOWARD EFTS.
>12,4000 MG/M3 (2000 PPM). INGEST: PRACTICALLY NON-TOXIC. CHRONIC:
HLTH STUDIES HAVE SHOWN THA T MANY PETROLEUM HYDROCARBONS &
SYNTHETIC LUBRICANTS POSE POTENTIAL HUMAN HEALTH RISKS WHICH MAY
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: VARY FROM PERSON TO PERSON. AS A
PRECAUTION, EXPOSURE TO LIQUID, VAPOR, MIST OR FUMES SHOULD BE
MINIMIZED. SYMP OF EXPOSURES: HIGH VAP CONC (>1000 PPM) ARE
IRRITATIVE TO EYES AND RESPIRATORY TRACT, MAY CAUSE HEADACHES AND
DIZZINESS, ARE ANESTHETIC, AND MAY HAVE OTHER CENTRAL NERVOUS
SYSTEM EFFECTS.
First Aid
First Aid:EYES: IF SPLASHED INTO EYES, FLUSH WITH CLEAR WATER FOR AT
LEAST 15 MIN OR UNTIL IRRITATION SUBSIDES. SKIN: IN CASE OF
CONTACT, REMOVE ANY CONTAMINATED CLOTHING AND CLEANSE SKIN
THOROUGHLY WITH WATERL ESS HAND CLEANER FOLLOWED BY WASHING WITH
SOAP AND WATER. INHAL: IF OVERCOME BY VAPORS, REMOVE FROM EXPOSURE
AND CALL A PHYSICIAN IMMED. INGEST: DO NOT INDUCE VOMIT; CALL
PHYSICIAN IMMED.
Fire Fighting
Flash Point Method:TCC
Flash Point:109F,43C
Lower Limits:0.7%
Upper Limits:6.5%
Extinguishing Media:FOAM, WATER SPRAY, DRY CHEMICALS, OR CARBON
DIOXIDE.
Fire Fighting Procedures:IF LEAK/SPILL HAS IGNITED, USE STD FIRE PROC
FOR PETRO BASED LIQ. WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
FOR ENCLSD/CONFINED SPACES. MINIMIZE (SUPDAT)
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDIZING
AGENTS.
Accidental Release
Spill Release Procedures:SHUT OFF/ELIM ALL IGNIT SOURCES. KEEP PEOPLE
AWAY. RECOVER FREE PROD. ADD SAND/EARTH/OTHER SUITABLE ABSORB TO
SPILL AREA. MINIMIZE BRTHG VAP/SKIN CONT. VENT CONFINED SPACES.
OPEN ALL WINDOWS/DOORS. KE EP OUT OF SEWERS & WATERCOURSES BY
DIKING (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, OPEN FLAME &
SPARKS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE(LIQ/VAP) & CAN BE
DANGEROUS. TO AVOID RISK OF EXPLOSION, DO NOT PRESSURE OR EXPOSE
EMPTY CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF
IGNITION.
Exposure Controls
Respiratory Protection:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Ventilation:MECHANICAL: GENERAL VENTILATION ADEQUATE.
Protective Gloves:NONE NEEDED UNDER NORMAL CONDITIONS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE NEEDED UNDER NORMAL CONDITIONS.
Work Hygienic Practices:MINIMIZE BRTHG VAP/MIST. AVOID PRLNG/RPTD CONT
W/SKIN. REMOVE CONTAMD CLTHG; LAUNDER/DRY-CLEAN BEFORE REUSE. (SUPP
DATA)
Supplemental Safety and Health
FIRE FIGHT PROC: BRTHG GAS/VAP/FUMES OR DECOMP PROD. SPILL PROC:
/IMPOUNDING. ADVISE AUTH IF PROD HAS ENTERED OR MAY ENTER
SEWERS/WATERCOURSES/EXTENSIVE LAND AREAS. ASSURE CONFORMITY
W/APPLIC GOVT REG S. CONTINUE TO OBSERVE PREC FOR VOLAT, COMBUST
VAP FROM ABSORB MATL. HYGIENE PRAC: CLEANSE SKIN THORO AFTER
CONT,(ING 3)
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:322F,161C
Vapor Pres:<10(@26C)
Vapor Density:>5
Spec Gravity:0.75(@15C)
Evaporation Rate & Reference:0.3(BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE: <0.1%
Appearance and Odor:CLEAR WATER WHITE LIQUID, FAINT PETROLEUM
HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS SUCH AS LIQUID CHLORINE OR
CONCENTRATED O*2.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN THE CASE OF INCOMPLETE COMBUSTION.
Disposal
Waste Disposal Methods:WASTE LIQ SHOULD BE DISPOSED OF IN AN
ENVIROMENTALLY SAFE MANNER & IN ACCORDANCE WITH GOVERNMENTAL
REGULATIONS. DISPOSAL REGULATIONS VARY FROM LOCALITY TO LOCALITY,
THEREFORE, CONSULT YOUR LOCAL, STAT E & FED AUTH TO DETERMINE
PROPER METHODOF DISP.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.